From: Frank (ocsic@web.de)
Date: Wed Sep 13 2006 - 19:08:55 ART
Alexei Monastyrnyi schrieb:
Hi,
are you sure this is flash for the 2610? I had the same error while
trying to
setup an flash for an 2600XM on an 2600. They don't match! I found it
out checking the partnumbers.
Frank
> Hi List.
>
> Long time no see. :-)
>
> Patching, rack-mounting and formatting - getting ready for the next
> try. :-)
>
> Got 2611 routers with 16Mb flash, apparently unformatted.
>
> Is the any way other than xmodem on 115 Kbod to load IOS from ROMMON?
> ROMMON cannot format flash and tftpdnld depends on formatted flash.
>
> Following this URL does not help either.
> http://www.cisco.com/en/US/products/hw/routers/ps259/products_configuration_guide_chapter09186a008007e5fd.html
>
>
> Am I missing something?
>
> Cheers,
> A.
>
>
> rommon 34 > boot c2600-i-mz.123-20.bin 172.16.136.62
> get_man_dev: Unknown device - probably NOT formatted.
> unknown flash device - mandev code = 0xffff
> cannot read flash info
> getdevnum warning: device "flash" has size of zero
> get_man_dev: Unknown device - probably NOT formatted.
> unknown flash device - mandev code = 0xffff
> cannot read flash info
> getdevnum warning: device "flash" has size of zero
> open: read error...requested 0x4 bytes, got 0x0
> trouble reading device magic number
> boot: cannot open "flash:"
> an alternate boot helper program is not specified
> (monitor variable "BOOTLDR" is not set)
> and unable to determine first file in bootflash
> loadprog: error - on file open
> boot: cannot load "c2600-i-mz.123-20.bin 172.16.136.62"
> rommon 35 > set
> PS1=rommon ! >
> IP_ADDRESS=172.16.136.1
> IP_SUBNET_MASK=255.255.255.192
> TFTP_SERVER=172.16.136.62
> DEFAULT_GATEWAY=172.16.136.1
> TFTP_FILE=c2600-i-mz.123-20.bin
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART