From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Wed Sep 13 2006 - 01:11:32 ART
The commands are the same. The only real difference is that one has
more uppercase letters than the other ;-)
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
trevelle@wowway.com
Sent: Tuesday, September 12, 2006 8:48 PM
To: ccielab@groupstudy.com
Subject: ROUTE-MAP redistribution
Please let me know if there is a differnce between the two commands. I
just wanted to know so that I get it right in the lab. Thx in advance.
The task is to advertise the LPBK interface into ospf without using the
network command.
Rack1R5(config-router)#REDIstribute CONnected Subnets ROUTE-map LPBK
Rack1R5(config-router)#redistribute CONnected ROute-map LPBK SUbnets
router ospf 1
router-id 150.1.5.5
log-adjacency-changes
redistribute connected subnets route-map LPBK
network 191.1.5.5 0.0.0.0 area 5
network 191.1.125.5 0.0.0.0 area 0
!
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART