From: Marvin Greenlee (marvingreenlee@yahoo.com)
Date: Thu Sep 07 2006 - 17:16:03 ART
On the v2.0 Blueprint, under section IV - B
Cisco Secure ACS Configuration
http://www.cisco.com/web/learning/le3/ccie/security/lab_exam_blueprint_v2.html
--- marc fernandez <mag08036@yahoo.com> wrote:
> Where on Ciscos website does it specify that the
> candidate will have to configure the ACS himself.
> Just
> trying to find out where this conclusion was
> reached.
>
> Marc
>
> --- Jens Petter <jenseike@start.no> wrote:
>
> > After january 1, you will be requered to configure
> > the ACS yourselfe...
> > Until then, the
> > ACS is preconfigured. You will have access to the
> > log section for
> > troubleshooting on the ACS, but everything else
> you
> > are blocked from...
> >
> > Jens
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> > [mailto:nobody@groupstudy.com] On Behalf Of 2nd
> > CCIE
> > Sent: 3. september 2006 10:14
> > To: security@groupstudy.com;
> ccielab@groupstudy.com
> > Subject: CCIE Security lab question
> >
> > Hi Folks ;
> > is it the candidate resposibilty to configure
> the
> > ACS server on the sec
> > lab or it will be pre-configured and untouchable ?
> >
> > thanks
> >
> >
> > ---------------------------------
> > Do you Yahoo!?
> > Everyone is raving about the all-new Yahoo!
> Mail.
> >
> >
>
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART