From: Scott Morris (swm@emanon.com)
Date: Thu Sep 07 2006 - 17:10:39 ART
http://www.cisco.com/web/learning/le3/ccie/announcements/#securitychanges200
6
"Eliminate preconfigured ACS and require candidates to configure."
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPExpert VP - Curriculum Development
IPExpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of marc
fernandez
Sent: Thursday, September 07, 2006 3:23 PM
To: Jens Petter; '2nd CCIE'; security@groupstudy.com; ccielab@groupstudy.com
Subject: RE: CCIE Security lab question
Where on Ciscos website does it specify that the candidate will have to
configure the ACS himself. Just trying to find out where this conclusion was
reached.
Marc
--- Jens Petter <jenseike@start.no> wrote:
> After january 1, you will be requered to configure the ACS
> yourselfe...
> Until then, the
> ACS is preconfigured. You will have access to the log section for
> troubleshooting on the ACS, but everything else you are blocked
> from...
>
> Jens
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of 2nd CCIE
> Sent: 3. september 2006 10:14
> To: security@groupstudy.com; ccielab@groupstudy.com
> Subject: CCIE Security lab question
>
> Hi Folks ;
> is it the candidate resposibilty to configure the ACS server on the
> sec lab or it will be pre-configured and untouchable ?
>
> thanks
>
>
> ---------------------------------
> Do you Yahoo!?
> Everyone is raving about the all-new Yahoo! Mail.
>
>
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART