From: Subhash P (subhashccie@gmail.com)
Date: Tue Sep 05 2006 - 21:23:29 ART
Hi Vishal,
Can you try disabling the " ip accounting" feature for a while and see if
its enabled?
Regards,
Subhash.
On 9/6/06, Vishal Patel <vpatel@accessproviders.com.au> wrote:
>
> Hey guys,
>
> I have a 7500 , with dual RSP 4 / 256 MB RAM.
>
> The router has 1 VIP 4-80 , and that VIP has two PAs
>
> 1) Fast Eth
>
> 2) ATM
>
> Customers connect to Fast Eth , on it's subinterfaces and almost all the
> Fast Eth subinterfaces have CAR being implemented ( may be around 250
> subinterfaces )
>
> And ATM is used to connect to the SP's network , it also have around 80
> VCs.
>
> Router runs around 12 VRFs but no MPLS ( VRFs are connected back to
> back
> )
>
> Now the issue is the cpu run at around 80 % on average ,and the IP Input
> Process is eating 25/30 % of the processes.
>
> I have trying to implement all the fast , CEF and DCEF switching , still
> it
> seems lot of traffic is process switched.
>
> VIP's cpu runs at only 20 %
>
> Any ideas which will help me to releive the CPU ?
>
> Cheers
>
> Vishal
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART