From: Petr Lapukhov (petr@internetworkexpert.com)
Date: Sun Sep 03 2006 - 11:19:23 ART
The trick is that is says "wait for caller".
If you have a leased line, ppp direction is "dedicated" by default,
and "chap wait" does make sense.
You need to set up one end as "ppp direction callin" and another
as "ppp direction callout" to simulate "dialup" situation.
HTH
2006/9/3, Sean C. <Upp_and_Upp@hotmail.com>:
>
> Hi Tim,
>
> There was a good thread on this last year on GS. Not sure if this will
> help
> you out, but pay attention to Marvin's last email:
> http://www.groupstudy.com/archives/ccielab/200503/threads.html#00604
>
> HTH,
> Sean
> ----- Original Message -----
> From: "Tim Chan" <timanji@yahoo.com>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, September 02, 2006 4:19 PM
> Subject: ppp chap wait
>
>
> Hi all,
>
> I know this might seem a bit obvious, but can someone explain the command
> "ppp chap wait"?
>
> According to the doccd:
> "To specify that the router will not authenticate to a peer requesting
> CHAP
> authentication until after the peer has authenticated itself to the
> router."
>
> But it's also enabled by default. That being the case, if two routers are
> trying to authenticate each
> other, then wouldn't they never come up because they are both waiting for
> each other to authenticate first?
> (Which I know does not happen.)
>
> I'm asking because in IEWB lab 18, task 3.1 says to make sure that R4
> doesn't respond to chap
> authentication before R5 has been successfully authenticated.
>
> The definition of "ppp chap wait" would appear to be the solution, but it
> isn't.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Petr Lapukhov, CCIE #16379 petr@internetworkexpert.comInternetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 Outside US: 775-826-4344
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:39 ART