From: 2nd CCIE (doubleccie@yahoo.com)
Date: Sat Sep 02 2006 - 10:46:45 ART
Hi Folks ;
I know this has been for discussion recently ..but im not able to reach the solution from the archive ..so here we go
--------R2 -------|
R1------| R4
-----------R3------|
R1,R2,R3 are on same AS 10 , R4 on AS 20
R4 advertises the lo1 netw (10.1.1.1/24) to both R2 and R3 via ebgp
R2 and R3 send the network to R1 via ibgp
what i want to achieve is that R1 load balance the traffic to R4 across both R2 and R3
I can see the network 10.1.1.1 on the bgp table twice , however on the routing table is shows only from R2 .
I am using maximum paths 2 on R1 , but i do not have maximum-paths ibgp at all under the bgp process (version 12.2(27))
any ideas ?
---------------------------------
How low will we go? Check out Yahoo! Messengers low PC-to-Phone call rates.
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:39 ART