From: Gianpietro Lavado (gianpietro1@gmail.com)
Date: Fri Sep 01 2006 - 15:45:37 ART
The call is going up but i'm sure PPP LCP is not. Try debugging PPP
negotiation and authentication to see what's happening, it could be one of
this two things:
- PPP authentication is failing.
- The call is being compressed somewhere.
HTH
Gianpietro
On 8/30/06, Sumanta B <ciscob20@gmail.com> wrote:
>
> Hi,
>
> I have used the configuration from the following link.
>
>
> http://www.cisco.com/en/US/tech/tk801/tk379/technologies_configuration_example09186a0080094abd.shtml#diag
>
> Regards,
> S B
>
> On 8/30/06, HUZEFA RATLAMWALA <ratlamwala.huzefa@gmail.com> wrote:
> >
> > Can you post ur config ?
> >
> > On 8/29/06, Sumanta B <ciscob20@gmail.com> wrote:
> >
> > > Hi,
> >
> > I have this peculiar problem which never seen before for such a simple
> > setup.
> >
> > R1-------------ISDN-------R2
> >
> > I have configured the R1 & R2 for ISDN dialing parameters and both comes
> > up.
> > Even when I see
> > the "show isdn active" it shows the call setup and other details But it
> > simply dosn't pings. It used to
> > work before. Just want to confirm it to ensure that I am not missing
> > anything.
> >
> > dialer string, isdn switch type, dialer-group, dialer-list, ip address ,
> > encap ppp are all set.
> >
> > Waiting for response.
> >
> > S
> >
> > _______________________________________________________________________
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:39 ART