From: Ivan (ivan@iip.net)
Date: Thu Aug 31 2006 - 08:29:58 ART
Are u sure that distribute list _filter_ incoming announce? I think that
"distribute-filter in" only control intalling this routes in FIB.
> that should do it:
>
> passive interface will make sure you do not send and distribute-list will
> take care of receiving...
>
> Godswill Oletu
> CCIE #16464
>
>
> ----- Original Message -----
> From: "tonynguyenchi" <tonynguyenchi.ccie@gmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, August 31, 2006 5:33 AM
> Subject: InternetworkExpert Ver3 Lab 13 Task 4.2 RIP
>
> > Dear Group,
> >
> > The task requires: configure R4 to advertise the 204.12.1.0/24 (F0/0)
>
> subnet
>
> > via RIP, but do not send and receive RIP update on this interface.
> >
> > Can I do this as the following:
> >
> > router rip
> > version 2
> > passive-interface FastEthernet0/0
> > network 139.1.0.0
> > network 150.1.0.0
> > network 204.12.1.0
> > distribute-list BLOCK_RIP in FastEthernet0/0
> > no auto-summary
> > !
> > ip access-list standard BLOCK_RIP
> > deny any
> >
> > Thanks and best regards,
> >
> > Tony
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-- Ivan
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:59 ART