From: Godswill Oletu (oletu@inbox.lv)
Date: Thu Aug 31 2006 - 07:55:41 ART
that should do it:
passive interface will make sure you do not send and distribute-list will
take care of receiving...
Godswill Oletu
CCIE #16464
----- Original Message -----
From: "tonynguyenchi" <tonynguyenchi.ccie@gmail.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, August 31, 2006 5:33 AM
Subject: InternetworkExpert Ver3 Lab 13 Task 4.2 RIP
> Dear Group,
>
> The task requires: configure R4 to advertise the 204.12.1.0/24 (F0/0)
subnet
> via RIP, but do not send and receive RIP update on this interface.
>
> Can I do this as the following:
>
> router rip
> version 2
> passive-interface FastEthernet0/0
> network 139.1.0.0
> network 150.1.0.0
> network 204.12.1.0
> distribute-list BLOCK_RIP in FastEthernet0/0
> no auto-summary
> !
> ip access-list standard BLOCK_RIP
> deny any
>
> Thanks and best regards,
>
> Tony
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:59 ART