From: Rob Pethick \(ropethic\) (ropethic@cisco.com)
Date: Mon Aug 28 2006 - 11:08:38 ART
http://www.cisco.com/univercd/home/home.htm
I would use the following URL, go the IOS being used and search within
IOS configuration guides.
This is how I perform all my research. The lab does not allow a search
function. I typically go to the config guide I need (IP routing,
Multicast) and then do a find on the term, command I am looking for.
Robert Pethick
Systems Engineer
Cisco Systems
1 Penn Plaza
New York, NY 10119
Cell: 203-848-9858
Office: 212-714-4039
ropethic@cisco.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Josef A
Sent: Monday, August 28, 2006 8:14 AM
To: Cisco certification
Subject: Searching cisco.com/univercd
Hi All,
How can I search the new cisco.com/univercd so that the only results I
get are those from *univercd*. When I do a search on the univercd page I
get a general cisco search page, How can I narrow my search to only
univercd?
Thanks
Josef
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:59 ART