From: sabrina pittarel (sabri_esame@yahoo.com)
Date: Sun Aug 27 2006 - 03:23:01 ART
AFAIK,
the
distance <dist> [ <gateway> <wildmask> <acl>]
command under EIGRP doesn't work for external routes.
The EIGRP admin distance of external routes can only
be changed globally (not per route or gateway) using
the
distance eigrp
command
Sabrina
--- Angelo De Guzman
<a.deguzman@wesolv.ph.fujitsu.com> wrote:
> Hi,
> Anyone had an issue with the distance command
> under EIGRP. I wanted to set an
> AD of 99 to routes I am receiving from my neighbor
> 172.30.200.7. I can't make
> this work???
>
> IOS version: System image file is
> "flash:c3640-js-mz.124-5.bin"
>
> R5#sh ip eigrp neighbor
> IP-EIGRP neighbors for process 1
> H Address Interface Hold
> Uptime SRTT RTO Q Seq
> (sec)
> (ms) Cnt Num
> 0 172.30.200.6 Et0/0 14
> 00:00:02 4 200 0 123
> 1 172.30.200.7 Et0/0 14
> 02:49:42 8 200 1 53
>
> !
> access-list 1 permit 10.7.0.0 0.0.3.0
> !
> router eigrp 1
> redistribute connected route-map connect2eigrp
> redistribute ospf 1 match internal external 1
> external 2
> passive-interface default
> no passive-interface Ethernet0/0
> network 172.30.200.0 0.0.0.127
> default-metric 1000 1000 255 100 1500
> distance 99 172.30.200.7 0.0.0.0 1
> no auto-summary
>
> For some reason the AD does not change.
> D EX 10.7.1.0/24 [170/2841600] via 172.30.200.7,
> 00:01:51, Ethernet0/0
> D EX 10.7.2.0/24 [170/2841600] via 172.30.200.7,
> 00:01:51, Ethernet0/0
> Thanks,
> Angelo
>
>
>
>
>
> ***********************
> No virus was detected in the attachment no filename
>
> Your mail has been scanned by InterScan MSS.
> ***********-***********
>
>
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:58 ART