From: Angelo De Guzman (a.deguzman@wesolv.ph.fujitsu.com)
Date: Sun Aug 27 2006 - 02:45:00 ART
Hi,
Anyone had an issue with the distance command under EIGRP. I wanted to set an
AD of 99 to routes I am receiving from my neighbor 172.30.200.7. I can't make
this work???
IOS version: System image file is "flash:c3640-js-mz.124-5.bin"
R5#sh ip eigrp neighbor
IP-EIGRP neighbors for process 1
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.30.200.6 Et0/0 14 00:00:02 4 200 0 123
1 172.30.200.7 Et0/0 14 02:49:42 8 200 1 53
!
access-list 1 permit 10.7.0.0 0.0.3.0
!
router eigrp 1
redistribute connected route-map connect2eigrp
redistribute ospf 1 match internal external 1 external 2
passive-interface default
no passive-interface Ethernet0/0
network 172.30.200.0 0.0.0.127
default-metric 1000 1000 255 100 1500
distance 99 172.30.200.7 0.0.0.0 1
no auto-summary
For some reason the AD does not change.
D EX 10.7.1.0/24 [170/2841600] via 172.30.200.7, 00:01:51, Ethernet0/0
D EX 10.7.2.0/24 [170/2841600] via 172.30.200.7, 00:01:51, Ethernet0/0
Thanks,
Angelo
***********************
No virus was detected in the attachment no filename
Your mail has been scanned by InterScan MSS.
***********-***********
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:58 ART