From: Anderson Mota Alves (mota_anderson@hotmail.com)
Date: Thu Aug 24 2006 - 14:13:29 ART
Hi guys, I'm facing the same problem or at least trying to configure
something that Gustavo Novais tried a year ago in this Group Study, I was
looking for a possibe solution or some pointers and I found the link
below but using the same question as his I can't get this working.. Scott
I'm also copying you to see if you could kindly help me on this issue.
http://www.groupstudy.com/archives/ccielab/200507/msg00335.html The only
thing I change from his config is that I'm using an standard ACL since I
saw that the line VTY don't work very well with extended ACL So basically
I would like to limit that only the Router with the source 192.168.1.1
can telnet to the R4 using the username test, all other routers should
use username cisco R4 config:username cisco password cisco
username test access-class 100 password testusername test autocommand
show ip interface brief
access-list 80 permit 192.168.1.1line vty 0 4
login local
Thanks everybody, Andy
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:58 ART