802.1 with Radius server on the Router

From: xprtofnet (xprtofnet@yahoo.com)
Date: Wed Aug 23 2006 - 00:44:50 ART

• Next message: Brian Dennis: "RE: Re(2): 12.4 Code"
• Previous message: xprtofnet: "Automatic disconnect from Router after a command is run"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

there is a new feature in 12.4 that let you configure
radius server on the router. i have been playing with
it for a while with no success, objective is to do
this:

1-use the router as a radius server
2-use the local user name / password to authenticate

here is the url but note that url give lot more
configs for profiles/ssid etc..

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hsec_c/part25/ch15/hlocauth.htm

Any one advise of how to achieve the above with 802.1x
and local radius server ?

thank you,

• Next message: Brian Dennis: "RE: Re(2): 12.4 Code"
• Previous message: xprtofnet: "Automatic disconnect from Router after a command is run"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:58 ART