From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Mon Aug 21 2006 - 13:08:26 ART
These are issues of semantics that you should check with the
proctor during the exam if you're unclear. The task in question simply
means to not use either point-to-point or multipoint subinterfaces to
solve the task, which ultimately comes down to what the interpretation
of "only the physical interface" means. Also you need to take into
account what the possible solutions are. Can you solve this task
without the use of any other logical interface? Did you try using
secondary addressing on the Frame Relay interface?
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> pmarkov@paraflow.bg
> Sent: Monday, August 21, 2006 5:28 AM
> To: ccielab@groupstudy.com
> Subject: FR physical interface - lab 18
>
> IEWB lab 18, task 2.1 states "configure FR hub and spoke using ONLY
> physical interfaces and with different subnets for the links from the
> spokes to the hub". I wasted a couple oh hours trying this impossible
> mission and looked at the solition guide at the end - for my biggest
> surprise the solution was with pppoFR - i am sure that Virtual
template
> interface is logical interface, so from my point of view this solution
> does not fulfill the requirements.
>
>
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:58 ART