From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sat Aug 19 2006 - 21:35:55 ART
I'm posting the latest solutions for all of our IEWB-RS labs that
include a verification for each tasks. I've posted the first few lab
solutions that include the new verifications and I'll post lab 11 later
tonight or tomorrow. This should help with your question.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joshua
Sent: Saturday, August 19, 2006 5:00 PM
To: ccielab@groupstudy.com
Subject: IEWB Lab 11 4.7 Verification Question
Hi, Group,
I am trying to verify Lab11 4.7. To simulate the ckt btw R2 and R5 down,
i remove "frame map ip 187.1.235.5 205 br" on R2. But i could not ping
R5 and behind.
"debug frame packet" shows "*Mar 1 00:42:06.295: Serial0/0.235:Encaps
failed--no map entry link 7(IP)."
Do Layer 3 to Layer2 recursion as follow:
Rack1R2#sh ip route 150.1.5.5
Routing entry for 150.1.5.0/24
Known via "eigrp 10", distance 90, metric 21152000, type internal
Redistributing via eigrp 10
Last update from 187.1.235.3 on Serial0/0.235, 00:01:56 ago
Routing Descriptor Blocks:
* 187.1.235.3, from 187.1.235.3, 00:01:56 ago, via Serial0/0.235
Route metric is 21152000, traffic share count is 1
Total delay is 45000 microseconds, minimum bandwidth is 128 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 1/255, Hops 2
Rack1R2#187.1.235.3
Trying 187.1.235.3 ... Open
User Access Verification
Password:
Rack1R3>sh ip route 150.1.5.5
Routing entry for 150.1.5.0/24
Known via "eigrp 10", distance 90, metric 20640000, type internal
Redistributing via eigrp 10
Last update from 187.1.235.5 on Serial1/1.235, 00:02:58 ago
Routing Descriptor Blocks:
* 187.1.235.5, from 187.1.235.5, 00:02:58 ago, via Serial1/1.235
Route metric is 20640000, traffic share count is 1
Total delay is 25000 microseconds, minimum bandwidth is 128 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 1/255, Hops 1
Rack1R3>187.1.235.5
Trying 187.1.235.5 ... Open
User Access Verification
Password:
Rack1R5>sh ip route 150.1.5.5
Routing entry for 150.1.5.0/24
Known via "connected", distance 0, metric 0 (connected, via interface)
Redistributing via eigrp 10, ospf 1
Advertised by ospf 1 subnets route-map CONNECTED2OSPF
Routing Descriptor Blocks:
* directly connected, via Loopback0
Route metric is 0, traffic share count is 1
I must misunderstand something, but i could not figure it out. Please
help!
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART