From: Joshua (joshualixin@gmail.com)
Date: Sat Aug 19 2006 - 21:00:26 ART
Hi, Group,
I am trying to verify Lab11 4.7. To simulate the ckt btw R2 and R5 down, i
remove "frame map ip 187.1.235.5 205 br" on R2. But i could not ping R5 and
behind.
"debug frame packet" shows "*Mar 1 00:42:06.295: Serial0/0.235:Encaps
failed--no map entry link 7(IP)."
Do Layer 3 to Layer2 recursion as follow:
Rack1R2#sh ip route 150.1.5.5
Routing entry for 150.1.5.0/24
Known via "eigrp 10", distance 90, metric 21152000, type internal
Redistributing via eigrp 10
Last update from 187.1.235.3 on Serial0/0.235, 00:01:56 ago
Routing Descriptor Blocks:
* 187.1.235.3, from 187.1.235.3, 00:01:56 ago, via Serial0/0.235
Route metric is 21152000, traffic share count is 1
Total delay is 45000 microseconds, minimum bandwidth is 128 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 1/255, Hops 2
Rack1R2#187.1.235.3
Trying 187.1.235.3 ... Open
User Access Verification
Password:
Rack1R3>sh ip route 150.1.5.5
Routing entry for 150.1.5.0/24
Known via "eigrp 10", distance 90, metric 20640000, type internal
Redistributing via eigrp 10
Last update from 187.1.235.5 on Serial1/1.235, 00:02:58 ago
Routing Descriptor Blocks:
* 187.1.235.5, from 187.1.235.5, 00:02:58 ago, via Serial1/1.235
Route metric is 20640000, traffic share count is 1
Total delay is 25000 microseconds, minimum bandwidth is 128 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 1/255, Hops 1
Rack1R3>187.1.235.5
Trying 187.1.235.5 ... Open
User Access Verification
Password:
Rack1R5>sh ip route 150.1.5.5
Routing entry for 150.1.5.0/24
Known via "connected", distance 0, metric 0 (connected, via interface)
Redistributing via eigrp 10, ospf 1
Advertised by ospf 1 subnets route-map CONNECTED2OSPF
Routing Descriptor Blocks:
* directly connected, via Loopback0
Route metric is 0, traffic share count is 1
I must misunderstand something, but i could not figure it out. Please help!
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART