From: Bizzell, Keith (keith.bizzell@eds.com)
Date: Sat Aug 19 2006 - 02:23:09 ART
It really depends on what's on the other side. Debug your ospf events
and see if your timers are matching up. If they don't, you'll need to
manually set them under the interface. Multipoint to physical shouldn't
be a problem. Point-to-point may need to be tweaked....
Keith
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Udo Konstantin
Sent: Friday, August 18, 2006 11:59 PM
To: CCIE Groupstudy
Subject: OSPF over Frame-Relay
Hi Group,
sometimes when I work through my labs I'm really confused how to
configure ospf over Frame-Relay.
For example, I had a frame-relay cloud with a hub and spoke topologie.
One router had a multipoint interface and the other routers have only
physical interfaces ....
The question is do not change the network type on any router.
OK, what can I do ? Default to physical interface is non-broadcast and
the hub had point-to-multipoint...
Should I change the timer and configure with the neighbor command the
spokes ?
Udo
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART