From: sabrina pittarel (sabri_esame@yahoo.com)
Date: Mon Aug 14 2006 - 18:33:57 ART
Hi,
There were very good discussions about it in the month
of July. Please check the archives and search for
keywords like policing/police/shape/shaping, there is
a *lot* of useful information.
Second, you don't need to remember these formulas
(even if it is good if you do), just how to look for
them.
Search for the rate-limit command in the univerCD and
you'll have all the info you need.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hqos_r/qos_q1h.htm#wp1080850
Sabrina
--- Abidin Kahraman <abidin.kahraman@gmail.com> wrote:
> Hi Radoslav,
>
> Cisco IOS calculating Bc and Be with an assumed Tc
> of 125ms.
>
> For Shaping;
>
> Tc= Bc/CIR,
>
> Bc=Tc*CIR
>
> HTH,
> Abidin.
>
>
>
> On 8/11/06, Radoslav Vasilev <deckland@gmail.com>
> wrote:
> >
> > Hi Group,
> >
> > What would be the recommended way for choosing the
> normal burst size based
> > on the CIR values?
> > Presuming no Be is desired but only hard limit on
> the CIR is the goal.
> >
> >
> >
> > Rado
> >
> >
>
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART