From: Josef A (josefnet@gmail.com)
Date: Mon Aug 14 2006 - 22:18:33 ART
Rado
For CAR, Cisco recommends the following values for the normal and extended
burst parameters:
normal burst = configured rate * (1 byte)/(8 bits) * 1.5 seconds
extended burst = 2 * normal burst
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_c/fqcprt4/qcfpolsh.htm
HTH
Josef
On 8/11/06, Radoslav Vasilev <deckland@gmail.com> wrote:
>
> Hi Group,
>
> What would be the recommended way for choosing the normal burst size based
> on the CIR values?
> Presuming no Be is desired but only hard limit on the CIR is the goal.
>
>
>
> Rado
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART