From: Tony Schaffran (groupstudy@cconlinelabs.com)
Date: Sun Aug 13 2006 - 14:13:34 ART
Also, after Jan 07, the PIX will be replaced with Dual ASA5510's
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Jens
Petter
Sent: Sunday, August 13, 2006 10:07 AM
To: 'Jose James'; mag08036@yahoo.com; ccielab@groupstudy.com
Subject: RE: pix 515
Have to disagree with you on Q2. It does not matter since failover is not an
requirement for the lab before jan 07. After jan 07 you have failover in the
lab
blueprint. So, because of that you are fine using the Restricted... for
now....!!
Jens Petter Eikeland
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Jose
James
Sent: 13. august 2006 18:47
To: mag08036@yahoo.com; ccielab@groupstudy.com
Subject: Re: pix 515
1. Use an activation key
2. Yes cus you need unrestricted for failover and and to use all 6
interfaces
3. Yes
4. To my knowledge u can only run max 6 int
5. Nope
6 once unrestricted you have full access.
>From BlackBerry HandHeld Device
-----Original Message-----
From: nobody@groupstudy.com
To: ccielab@groupstudy.com
Sent: Sun Aug 13 16:38:39 2006
Subject: pix 515
I will be using the pix for my lab studies.
1)How do you go about changing from restricted to
unrestricted?
2)Does unrestricted and restricted matter for a home
lab?
3) can I simply upgrade the memory and run the latest
OS or IOS like a router?
4) can I simply add more interfaces with out any
problems?
5) does anyone see any other issues I may have for a
home lab?
6} do i need a license or key for a home lab (study
use)?
-marc
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART