From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Fri Aug 04 2006 - 13:40:29 ART
After thinking a while I think that this could be because R2 is in the same
broadcast with R5 that is the RP?
Any opinion is appreciated.
Thanks
Victor.-
_____
De: Victor Cappuccio [mailto:cvictor@protokolgroup.com]
Enviado el: Viernes, 04 de Agosto de 2006 11:32 a.m.
Para: 'ccielab@groupstudy.com'
Asunto: ip pim rp-add
Morning Guys,
Could anyone please explain this behavior?
Lo0-R5 ------ frame-relay ------- R2, running ip pim sparse.
And:
R2(config)#do clear ip mroute *
R2(config)#no ip pim rp-add 155.1.5.5 <---- REMOVING THE RP-ADDRESS
R2(config)#do show ip pim rp map
PIM Group-to-RP Mappings
R2(config)#do clear ip mroute *
R2(config)#do ping 224.1.1.1
Type escape sequence to abort.
Sending 1, 100-byte ICMP Echos to 224.1.1.1, timeout is 2 seconds:
Reply to request 0 from 150.1.25.5, 124 ms <-----Works :S
R2(config)#
R2(config)#
R2(config)#
R2(config)#ip pim rp-add 155.1.5.5
R2(config)#do show ip pim rp map
PIM Group-to-RP Mappings
Group(s): 224.0.0.0/4, Static
RP: 155.1.5.5 (?)
R2(config)#do ping 224.1.1.1
Type escape sequence to abort.
Sending 1, 100-byte ICMP Echos to 224.1.1.1, timeout is 2 seconds:
Reply to request 0 from 150.1.25.5, 68 ms <--- Also Works :S :S
R2(config)#
Thanks
Victor.--
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:56 ART