PIM sparse-dense mode

From: Sami (sy1977@gmail.com)
Date: Thu Aug 03 2006 - 16:27:58 ART

• Next message: Christopher M. Heffner: "RE: Allowing ISAKMP Traffic through PIX"
• Previous message: Patricia Loreal: "Frame-relay Link Efficiency."
• Next in thread: Victor Cappuccio: "RE: PIM sparse-dense mode"
• Maybe reply: Victor Cappuccio: "RE: PIM sparse-dense mode"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Group,

When IP PIM NBMA mode is enabled in sparse-dense mode it gives a warning
that it should not be used in spase-dense mode. In case of NBMA R3 Hub and
R1 and R2 spokes and sparse dense is used.First question can we use IP PIM
NBMA mode in real lab , if not what else ?

- Second question can't we use normal access list if task say deny IGMP
request from 237.1.1.1 or ip igmp filter with profile is required..

Thanks

• Next message: Christopher M. Heffner: "RE: Allowing ISAKMP Traffic through PIX"
• Previous message: Patricia Loreal: "Frame-relay Link Efficiency."
• Next in thread: Victor Cappuccio: "RE: PIM sparse-dense mode"
• Maybe reply: Victor Cappuccio: "RE: PIM sparse-dense mode"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:56 ART