From: Subhash P (subhashccie@gmail.com)
Date: Thu Aug 03 2006 - 16:26:29 ART
Hi all,
You can even try Riverbed products also. www.riverbed.com Its heard that
Cisco is going to acquire Riverbed shortly as Peribit was acquired by
Juniper.
cheers,
Subhash.
On 8/2/06, cstubbs@tampabay.rr.com <cstubbs@tampabay.rr.com> wrote:
>
> We use Peribit's. They work very well. Our DR pipe is an OC3 and the
> delay increases from 40ms to 1850ms, when we diable the compression and
> accleration on the Peribit. This makes the ATM unusable.
>
> ----- Original Message -----
> From: Jai Prakash <jpjsr06@gmail.com>
> Date: Tuesday, August 1, 2006 7:04 pm
> Subject: Re: bandwith shaper
> To: Jens Petter Eikeland <jenseike@start.no>
> Cc: ccielab@groupstudy.com
>
> > Hi Jens,
> >
> > Packeteer is very good HW Appliance for Bandwidth Shaping.
> >
> > Here is the link where you will find lots of info
> >
> > http://www.packeteer.com/
> >
> >
> > Best Regards,
> > Jai
> >
> > On 8/1/06, Jens Petter Eikeland <jenseike@start.no> wrote:
> > >
> > > Hi all.
> > >
> > >
> > >
> > > Anybody that can recomend for me an hardware bandwith shaper
> > appliance> that
> > > are able to share my customers bandwith on
> > > ip ranges/port. It would be an advantage if the shaper had some
> > kind of
> > > failover mechanism to backup shaper. Secondly it have
> > > to have more than two interfaces, minimum 4 fa or ge interfaces.
> > >
> > >
> > >
> > > Thanks
> > >
> > >
> >
> _______________________________________________________________________>
> Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:56 ART