From: Dustin H (dustygoody@gmail.com)
Date: Mon Jul 31 2006 - 23:07:29 ART
I think you need to enable mtu discover and do not block icmp both direction
of the path. dusty
On 7/31/06, stephen.paynter@bt.com <stephen.paynter@bt.com> wrote:
>
> http://www.cisco.com/en/US/tech/tk827/tk369/technologies_tech_note09186a
> 0080093f1f.shtml
>
> This link may help
>
> Regards
> Stephen Paynter| CCIE#10206 | BT Global Services |
>
> E: stephen.2.paynter@bt.com | www.bt.com/globalservices
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Elliott Reyes
> Sent: Friday, July 14, 2006 3:12 AM
> To: ccielab@groupstudy.com
> Subject: IPSEC and MTU
>
> For all the CCIE Security Candidates,
>
>
>
> What is the command you can use to have the router self adjust the MTU
> size coming from the workstations attached to the lan to avoid
> fragmentation ??
>
>
>
>
>
> If you want to lower the MTU coming from the workstations.
>
>
>
>
>
>
>
> Elliott
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:55 ART