From: srdja blagojevic (srdja1@pexim.co.yu)
Date: Wed Aug 02 2006 - 15:26:53 ART
Chris,
you have to enable ip nbar protocol-discovery in order to use NBAR in MQC.
Here is useful link:
http://www.cisco.com/en/US/products/ps6441/products_configuration_guide_chap
ter09186a008064fb52.html#wp1043332
HTH,
Srdja
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Guzman, Chris
Sent: Wednesday, August 02, 2006 19:16
To: ccielab@groupstudy.com
Subject: NBAR and MQC
Is it necessary to enable NBAR on the interface using the ip nbar
protocol-discovery command in order to use NBAR to as match criteria in a
class map for a MQC policy
class qos1
match protocol ftp
In other words, will the match criteria work If I don't NOT have ip nbar
protocol-discovery enabled on the interface.
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:55 ART