From: Shanky (shankyz@gmail.com)
Date: Mon Jul 31 2006 - 11:09:27 ART
Hi,
In my understanding,
ip igmp join-group will cause the router to process the multicast traffic
ip igmp static-group will cause the router to flood the traffic on to the
multicast enabled interfaces but not process it.
On 7/31/06, Anderson Mota Alves <mota_anderson@hotmail.com> wrote:
>
> Hi Brians,
>
> The question is asking you to configure the igmp group 225.25.25.25 for
> testing purposes, to be configured on SW1 and to not allow SW1 to process
> switch this traffic:
>
> From my understanding in order for you to enable a group to be fast switch
> process you need to configure it with command "ip igmp static-group" so I
> configured using the command "ip igmp join-group" but when I took a look
> in
> the solution for this task the solution was pointing the correct answer
> being "ip igmp static-group".
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/himc_r/mlt_i1h.htm#wp1130052
Thanks
Shanky
Is the solution wrong or I may be missing something here?
>
> Thanks,
>
> Andy
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:49 ART