From: Shane Lee (emaomi@gmail.com)
Date: Mon Jul 24 2006 - 23:08:29 ART
Try this on R5:
default-information originate route-map SW1
route-map SW1 permit 10
match interface Ethernet0/1
On 7/24/06, Joshua <joshualixin@gmail.com> wrote:
>
> Hi, group,
>
> IEWB 4.3 ask to generate a default route to SW1. When i verify in on R4, i
> also see the default route generate from R5. I think " distribute-list
> DEFAULT out Ethernet0/1" means it only allow the default route out on
> e0/1".
> So, what i did wrong?
>
> Rack1R4#sh ip route
> ....
> R* 0.0.0.0/0 [120/1] via 163.1.45.5, 00:00:03, Serial0/1
>
> Rack1R5#sh run | be rip
> router rip
> version 2
> passive-interface default
> no passive-interface Ethernet0/1
> no passive-interface Serial0/1
> network 163.1.0.0
> default-information originate
> distribute-list DEFAULT out Ethernet0/1
> no auto-summary
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART