IEWB 4.3 Question about distribute-list out

From: Joshua (joshualixin@gmail.com)
Date: Mon Jul 24 2006 - 22:52:54 ART

Next message: Shane Lee: "Re: IEWB 4.3 Question about distribute-list out"
Previous message: F. Tafa: "CCIE Service Provider"
Next in thread: Shane Lee: "Re: IEWB 4.3 Question about distribute-list out"
Maybe reply: Shane Lee: "Re: IEWB 4.3 Question about distribute-list out"
Maybe reply: Paul Schuuring: "RE: IEWB 4.3 Question about distribute-list out"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi, group,

IEWB 4.3 ask to generate a default route to SW1. When i verify in on R4, i
also see the default route generate from R5. I think " distribute-list
DEFAULT out Ethernet0/1" means it only allow the default route out on e0/1".
So, what i did wrong?

Rack1R4#sh ip route
....
R* 0.0.0.0/0 [120/1] via 163.1.45.5, 00:00:03, Serial0/1

Rack1R5#sh run | be rip
router rip
version 2
passive-interface default
no passive-interface Ethernet0/1
no passive-interface Serial0/1
network 163.1.0.0
default-information originate
distribute-list DEFAULT out Ethernet0/1
no auto-summary

Next message: Shane Lee: "Re: IEWB 4.3 Question about distribute-list out"
Previous message: F. Tafa: "CCIE Service Provider"
Next in thread: Shane Lee: "Re: IEWB 4.3 Question about distribute-list out"
Maybe reply: Shane Lee: "Re: IEWB 4.3 Question about distribute-list out"
Maybe reply: Paul Schuuring: "RE: IEWB 4.3 Question about distribute-list out"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART