From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Mon Jul 24 2006 - 14:27:06 ART
Hi,
I'm not a guru in any way, but I think that the access-list is backwards
Ip access-list sta 101
10 deny ospf any any
20 permit ip any any
Regards
Victor.-
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de
apilcher
Enviado el: Lunes, 24 de Julio de 2006 12:51 p.m.
Para: Damion Littlewood; Cisco certification
Asunto: Re: OSPF QoS - DE bit
Correct me if I am wrong QOS gurus, but I believe you can do this like.
Access-list 101 permit ospf any any Access-list 101 deny ip any any
Frame-relay de list 1 protocol ip list 101 Interface %frame-interface%
Frame-relay de-group 1 %dlci if needed%
-----Original message-----
From: Damion Littlewood damion.littlewood@googlemail.com
Date: Mon, 24 Jul 2006 08:16:10 -0400
To: "Cisco certification" ccielab@groupstudy.com
Subject: OSPF QoS - DE bit
> How would I setup frame relay traffic shaping to never set OSPF packets to
DE
> bit on?
>
> Could I use the match not option under class-maps or is there another way?
>
> Thanks a lot.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART