From: Hafizur Rahman \(UK\) (hafizur.rahman@uk.didata.com)
Date: Mon Jul 24 2006 - 04:21:44 ART
Hi
Questions say configure SW1 so that it does not accept more than 2mbps
of multicast traffic from devices in vlan R4-R6
Solution
Sw1 int f0/1
Storm-con multica level 20.00
Int f0./6
Storm-con multicast level 2.00
---- is this a typo. Should this not
be 20
Could any one pls help
Thanks
haf
Sheikh Rahman
Support Engineer
Dimension Data United
Kingdom
Dimension Data House
Building 2 , Waterfront Business Park
Hampshire GU51 3QT
+44 12 5277 9330 Office
+44 12 5277 9010 Fax
hafizur.rahman@uk.didata.com
For further information about Dimension Data,
please go to
www.dimensiondata.com
-----------------------------------------
Dimension Data - providing global
IP based solutions and services
for over 20 years supported locally from a
single point of contact
This email is confidential. If you are not the
intended recipient
then you must not copy it, forward it, use it for any
purpose, or
disclose it to another person.
Please also note that the
author of this email is not authorised
to; make any offers capable of
acceptance unless expressly stated
in a validly dated and attached document
which shall be subject to
the terms and conditions stated therein or,
conclude any contract
on behalf of Dimension Data by email.
Although
Dimension Data has taken reasonable precautions to ensure
no viruses are
present in this email, the company cannot accept
responsibility for any loss
or damage arising from the use of this
email or attachments.
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART