From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Sun Jul 23 2006 - 18:09:41 ART
You are only remarking
R4(config-cmap)#match ip dscp ?
<snip>
cs4 Match packets with CS4(precedence 4) dscp (100000)
</snip>
But the leading 0 are missing
So = 00100000
128 64 32 16 8 4 2 1
0 0 1 0 0 0 0 0
See why 32?
Now for the rate-limit part send traffic at 100 Kbps use a token buket size
of 8000 Bytes and please do not perform excess bucket operation Bc=Be
So Traffic that either conform or exceed, remark then to CS4
Victor.
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de
spycharlies@hotmail.com
Enviado el: Domingo, 23 de Julio de 2006 04:51 p.m.
Para: ccielab@groupstudy.com
Asunto: DSCP Marking ??
IEWBv3.vol2.lab8 task8.2
|
go/o |
------(R6)s0----(BB1)
|
|
my diagram is a little messed up, but R6 connects to the internal networks
with g0/0 interface, and to the BB1 with s0 interface.
TASK
-----
In order to get expedited forwarding throughout the Internet configure R6
to mark your PC's traffic with DSCP value os CS4.
Your PC's IP is 137.1.46.80, Donot use "class-map" to accpmplish this.
Solution
----------
interface GigabitEthernet0/0
rate-limit input access-group 1 100000 8000 8000 conform-action~
set-dscp-transmit 32 exceed-action set-dscp-transmit 32
!
access-list 1 permit 137.1.46.80
Could someone please explain to me how those values came about (100000, 8000
& 32)
thanks in advance
uyota
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART