From: uyota oyearone (spycharlies@hotmail.com)
Date: Sun Jul 23 2006 - 03:57:26 ART
I trying to understand your post.
off couse you have to use the network when advertising subnets. well
thank God u were able to detect it .
--------------------------------------------------------------------
From: "Magmax" <magmax@bigpond.net.au>
Reply-To: "Magmax" <magmax@bigpond.net.au>
To: <ccielab@groupstudy.com>
Subject: CCIE RIP Stupid Stupid Mistake anyone can make...
Date: Sun, 23 Jul 2006 15:04:44 +1000
>Guys,
>
>
>
>This is from my experience and this is not documented anywhere. This
thing
>did cost me time on my real lab. RIP process on router is not
enabled if you
>don't type network command or if you forget to type it
>
>
>
>Rack1R1#s
>
>Interface IP-Address OK? Method Status
>Protocol
>
>FastEthernet0/0 156.1.136.1 YES NVRAM up
>up
>
>Serial0/0 156.1.0.1 YES manual up
>up
>
>Serial0/1 unassigned YES
NVRAM administratively down
>down
>
>Ethernet1/0 unassigned YES
NVRAM administratively down
>down
>
>Virtual-Access1 unassigned YES unset up
>up
>
>Loopback0 150.1.1.1 YES NVRAM up
>up
>
>Rack1R1#conf t
>
>Enter configuration commands, one per line. End with CNTL/Z.
>
>Rack1R1(config)#router rip
>
>Rack1R1(config-router)#pass
>
>Rack1R1(config-router)#ver
>
>Rack1R1(config-router)#version 2
>
>Rack1R1(config-router)#no auto-summary
>
>Rack1R1(config-router)#passive-interface default
>
>Rack1R1(config-router)#no passive-interface fas
>
>Rack1R1(config-router)#no passive-interface fastEthernet 0/0
>
>Rack1R1(config-router)#^Z
>
>Rack1R1#sh running-config | be router rip
>
>Rack1R1#conf t
>
>Enter configuration commands, one per line. End with CNTL/Z.
>
>Rack1R1(config)#router rip
>
>Rack1R1(config-router)#ver
>
>Rack1R1(config-router)#version 2
>
>Rack1R1(config-router)#no auto-summary
>
>Rack1R1(config-router)#passive-interface de
>
>Rack1R1(config-router)#passive-interface default
>
>Rack1R1(config-router)#no passive-interface fas
>
>Rack1R1(config-router)#no passive-interface fastEthernet 0/0
>
>Rack1R1(config-router)#network 156.1.136.1
>
>Rack1R1(config-router)#^Z
>
>Rack1R1#sh running-config | be router rip
>
>
>
>*Mar 1 01:47:13.095: %SYS-5-CONFIG_I: Configured from console by
>consolerouter rip
>
> version 2
>
> passive-interface default
>
> no passive-interface FastEthernet0/0
>
> network 156.1.0.0
>
> no auto-summary
>
>!
>
>ip http server
>
>ip classless
>
>!
>
>!
>
>!
>
>!
>
>!
>
>call rsvp-sync
>
>!
>
>!
>
>mgcp profile default
>
>!
>
>!
>
>!
>
>dial-peer cor custom
>
>!
>
>
>
>Rack1R1#conf t
>
>Enter configuration commands, one per line. End with CNTL/Z.
>
>Rack1R1(config)#no router rip
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
------------------------------------------------------------------------
Play Q6 for your chance to WIN great prizes.
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART