CCIE RIP Stupid Stupid Mistake anyone can make...

From: Magmax (magmax@bigpond.net.au)
Date: Sun Jul 23 2006 - 02:04:44 ART

Next message: bindong.shi@gmail.com: "another solution for IEWB Lab 13 task 4.3"
Previous message: Magmax: "RIP Question"
Next in thread: uyota oyearone: "RE: CCIE RIP Stupid Stupid Mistake anyone can make..."
Maybe reply: uyota oyearone: "RE: CCIE RIP Stupid Stupid Mistake anyone can make..."
Maybe reply: Michael Stout: "RE: CCIE RIP Stupid Stupid Mistake anyone can make..."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Guys,

This is from my experience and this is not documented anywhere. This thing
did cost me time on my real lab. RIP process on router is not enabled if you
don't type network command or if you forget to type it

Rack1R1#s

Interface IP-Address OK? Method Status
Protocol

FastEthernet0/0 156.1.136.1 YES NVRAM up
up

Serial0/0 156.1.0.1 YES manual up
up

Serial0/1 unassigned YES NVRAM administratively down
down

Ethernet1/0 unassigned YES NVRAM administratively down
down

Virtual-Access1 unassigned YES unset up
up

Loopback0 150.1.1.1 YES NVRAM up
up

Rack1R1#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Rack1R1(config)#router rip

Rack1R1(config-router)#pass

Rack1R1(config-router)#ver

Rack1R1(config-router)#version 2

Rack1R1(config-router)#no auto-summary

Rack1R1(config-router)#passive-interface default

Rack1R1(config-router)#no passive-interface fas

Rack1R1(config-router)#no passive-interface fastEthernet 0/0

Rack1R1(config-router)#^Z

Rack1R1#sh running-config | be router rip

Rack1R1#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Rack1R1(config)#router rip

Rack1R1(config-router)#ver

Rack1R1(config-router)#version 2

Rack1R1(config-router)#no auto-summary

Rack1R1(config-router)#passive-interface de

Rack1R1(config-router)#passive-interface default

Rack1R1(config-router)#no passive-interface fas

Rack1R1(config-router)#no passive-interface fastEthernet 0/0

Rack1R1(config-router)#network 156.1.136.1

Rack1R1(config-router)#^Z

Rack1R1#sh running-config | be router rip

*Mar 1 01:47:13.095: %SYS-5-CONFIG_I: Configured from console by
consolerouter rip

version 2

passive-interface default

no passive-interface FastEthernet0/0

network 156.1.0.0

no auto-summary

ip http server

ip classless

call rsvp-sync

mgcp profile default

dial-peer cor custom

Rack1R1#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Rack1R1(config)#no router rip

Next message: bindong.shi@gmail.com: "another solution for IEWB Lab 13 task 4.3"
Previous message: Magmax: "RIP Question"
Next in thread: uyota oyearone: "RE: CCIE RIP Stupid Stupid Mistake anyone can make..."
Maybe reply: uyota oyearone: "RE: CCIE RIP Stupid Stupid Mistake anyone can make..."
Maybe reply: Michael Stout: "RE: CCIE RIP Stupid Stupid Mistake anyone can make..."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART