From: Leon van Dongen (l.dongen1@chello.nl)
Date: Thu Jul 20 2006 - 11:59:37 ART
It's a 12.3(11)T feature. So obviously it is present in 12.4 mainline.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_11/index.htm
--Leon
Jens Petter schreef:
> Hi group...
>
>
>
> I have heard that you from some late version of the 12.4 image will be able
> to set the interfaces that are going to participating
> directly on the interface with ospf v2 as you do in ospv v3.
>
>
>
> I just tried this on out 7206 router running 12.3(11)T2, and it seems to me
> I am able to do it here also. Is this right??? Is this really
> also supported on this IOS?
>
>
>
> I also looked at this document that is saying that this feature was
> introduced from 12.0(29)S and that it is intergrated in 12.3(11)T
>
>
>
> core(config)#int g0/1
>
> core(config-if)#ip ospf 1 area 0
>
> core(config-if)#do sh run int g0/1
>
> Building configuration...
>
>
>
> Current configuration : 407 bytes
>
> !
>
> interface GigabitEthernet0/1
>
> ip address 213.225.70.234 255.255.255.252
>
> ip virtual-reassembly
>
> media-type rj45
>
> no negotiation auto
>
> ip ospf 1 area 0
>
> end
>
>
>
> core(config-if)#do sh ip ospf da
>
>
>
> OSPF Router with ID (213.225.70.234) (Process ID 1)
>
>
>
> Router Link States (Area 0)
>
>
>
> Link ID ADV Router Age Seq# Checksum Link count
>
> 213.225.70.234 213.225.70.234 64 0x80000001 0x00EE95 4
>
> core(config-if)#do sh run | b router ospf
>
> router ospf 1
>
> log-adjacency-changes
>
>
>
>
>
> Jens P
>
> !
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART