From: Jens Petter (jenseike@start.no)
Date: Thu Jul 20 2006 - 10:45:54 ART
Hi group...
I have heard that you from some late version of the 12.4 image will be able
to set the interfaces that are going to participating
directly on the interface with ospf v2 as you do in ospv v3.
I just tried this on out 7206 router running 12.3(11)T2, and it seems to me
I am able to do it here also. Is this right??? Is this really
also supported on this IOS?
I also looked at this document that is saying that this feature was
introduced from 12.0(29)S and that it is intergrated in 12.3(11)T
core(config)#int g0/1
core(config-if)#ip ospf 1 area 0
core(config-if)#do sh run int g0/1
Building configuration...
Current configuration : 407 bytes
!
interface GigabitEthernet0/1
ip address 213.225.70.234 255.255.255.252
ip virtual-reassembly
media-type rj45
no negotiation auto
ip ospf 1 area 0
end
core(config-if)#do sh ip ospf da
OSPF Router with ID (213.225.70.234) (Process ID 1)
Router Link States (Area 0)
Link ID ADV Router Age Seq# Checksum Link count
213.225.70.234 213.225.70.234 64 0x80000001 0x00EE95 4
core(config-if)#do sh run | b router ospf
router ospf 1
log-adjacency-changes
Jens P
!
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART