Re: BGP between VRF's on the Same Router

From: Adam Asay (evilshortbus@yahoo.com)
Date: Thu Jul 20 2006 - 00:09:41 ART

• Next message: "CCIE: "need lab date of 9/7 CCIE SEC - San_Jose"
• Previous message: Richard Gallagher: "Re: BGP between VRF's on the Same Router"
• Maybe in reply to: Adam Asay: "BGP between VRF's on the Same Router"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

    Rich
  
  It worked. I had originally tried it on 2821 and the command didnt take, but the 6500 likes it.
  
  Thanks for your help.
  Adam
    

Richard Gallagher <rgallagh@cisco.com> wrote: It's a hidden command, can you just try entering it and see if it takes?
It's available in 12.2(18)SXD1, and 12.2(18)SXF.

Rich

Adam Asay wrote:
> I am trying to configure a BGP neighbor between two VRF's that are on one of our 6500's. I have seen a sample config were the command "bgp router-id allow-equal" was used to allow the neighbor to come online even though they have the same router id. I have tried upgrading to the latest and greatest adv enterprise code and still don't have this command. Has anyone done this before? Can I do it on a 6500? I have sup 720's and sup 32's.
>
> Thanks
> Adam
>
>
> ---------------------------------
> Yahoo! Music Unlimited - Access over 1 million songs.Try it free.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: "CCIE: "need lab date of 9/7 CCIE SEC - San_Jose"
• Previous message: Richard Gallagher: "Re: BGP between VRF's on the Same Router"
• Maybe in reply to: Adam Asay: "BGP between VRF's on the Same Router"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART