From: Osmanov, Orhan (Orhan.Osmanov@siemens.com)
Date: Wed Jul 19 2006 - 08:27:17 ART
Why don't use ip pim sparse-mode and ip pim auto-rp listener ?
Best Regards
Orhan Osmanov
Senior System Engineer
Mobile: +359 888 585630
E-mail: orhan.osmanov@siemens.com
SIEMENS EOOD
Bulgaria, Sofia 1309, 2 "Kukush"str.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ivan
Sent: Wednesday, July 19, 2006 1:24 PM
To: ccielab@groupstudy.com; Stavros Filargyropoulos
Subject: Re: Multicast
Once task restrict using dense mode, you can't using ip pim
sparce-dense-mode.
Instead AutoRP need use BSR. As for RP spoofing, think that ip pim
bsr-border
must be used at border routers.
> Hi,
>
> if a task tells you to configure so that RP spoofing should not
happen; and
> one restriction tells that ip pim dense is not allowed but they are
> multicast groups that the RP does not covers, could I use ip pim
> sparse-dense-mode and ip pim rp-announce-filter announcements at the
> mapping agent?
>
> tia
> *Stav.
>
>
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART