Re: Frame-relay DE bit.

From: Petr Lapukhov (petr@internetworkexpert.com)
Date: Tue Jul 18 2006 - 15:36:49 ART

Victor,

two things come into mind:

use class-map with "match fr-de" or.
simply check PVC's statistics for number of DE bit set frames.

That would not show you exact frames but will give the idea
if they are marked or not :)

HTH

2006/7/18, Victor Cappuccio <cvictor@protokolgroup.com>:
>
> Hello Guys, I'm trying to set the DE bit in some frame-relay frames, using
> de-group for certain packets,
>
> Is there anyway to look at the frames that arrives at the remote-end, to
> see
> if they carry the DE Bit ? (off course some of them would be drop by the
> switch, but others no)
>
>
>
> I'm looking for a similar method like like access-list does with L3 Pckts?
>
> access-list 123 permit ip any any precedence flash, but for layes 2
> Frame-relay Frames??
>
>
>
> I tried to deb frame-relay {
>
> deb frame-relay detailed
>
> deb frame-relay packet
>
> deb frame-relay verbose } to see if frames came with the DE bit in 1,
> but
> with no luck..
>
>
>
> Any suggestion?
>
>
>
> Thanks
>
> Victor.-
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
> 

-- 
Petr Lapukhov, CCIE #16379
petr@internetworkexpert.com

Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Outside US: 775-826-4344

This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART