From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Tue Jul 18 2006 - 15:52:56 ART
Hi Petr, I thought that I could maybe count the number of frames that came
from a certain Source with the DE bit set, just like acl does.
Thanks once again, for answering stupid questions :-D
Vmctor.-
_____
De: petrsoft@gmail.com [mailto:petrsoft@gmail.com] En nombre de Petr
Lapukhov
Enviado el: Martes, 18 de Julio de 2006 02:37 p.m.
Para: Victor Cappuccio
CC: CCIE LAB
Asunto: Re: Frame-relay DE bit.
Victor,
two things come into mind:
use class-map with "match fr-de" or.
simply check PVC's statistics for number of DE bit set frames.
That would not show you exact frames but will give the idea
if they are marked or not :)
HTH
2006/7/18, Victor Cappuccio <cvictor@protokolgroup.com>:
Hello Guys, I'm trying to set the DE bit in some frame-relay frames, using
de-group for certain packets,
Is there anyway to look at the frames that arrives at the remote-end, to see
if they carry the DE Bit ? (off course some of them would be drop by the
switch, but others no)
I'm looking for a similar method like like access-list does with L3 Pckts?
access-list 123 permit ip any any precedence flash, but for layes 2
Frame-relay Frames??
I tried to deb frame-relay {
deb frame-relay detailed
deb frame-relay packet
deb frame-relay verbose } to see if frames came with the DE bit in 1, but
with no luck..
Any suggestion?
Thanks
Victor.-
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART