From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Fri Jul 14 2006 - 12:23:15 ART
Hi There Shanky,
There is no validate-update-source option like in RIP, but for OSPF
Also
Router(config)#int lo 0
Router(config-if)#ip add 1.1.1.1 255.255.255.0 sec
Router(config-if)#exit
Router(config)#router ospf 1
Router(config)#
*Mar 1 00:31:28.823: %OSPF-4-NORTRID: OSPF process 1 cannot start. There
must be at l
east one "up" IP interface, for OSPF to use as router ID
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de Shanky
Enviado el: Viernes, 14 de Julio de 2006 10:58 a.m.
Para: Chris Broadway
CC: Jens Petter; ccielab@groupstudy.com
Asunto: Re: ospf peering
Can we use no validate-update-source so the router doesnt expect the remote
end to be on the same subnet here ?
Let me know if it works..
Shanky
On 7/14/06, Chris Broadway <midatlanticnet@gmail.com> wrote:
>
> I prefer to use sub interfaces. Secondy IPs are not good for peering.
>
> -Broadway
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART