From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Mon Jul 10 2006 - 01:50:14 ART
Turning off frame-relay inverse arp causes the router to stop dynamic
learning of the DLCIs, so you will need to map each dlci. This can be
turned on/off specifically for each dlci you want. For example,
Interface s0/0
Encapsulation frame-relay
no frame-relay inverse-arp ip 102
no frame-relay inverse-arp ip 103
(all other dlci's will be learned)
By the way, Arp Frame-relay does absolutely nothing.
HTH
Dave Schulz,
Email: dschulz@dpsciences.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
bindong.shi@gmail.com
Sent: Sunday, July 09, 2006 10:24 PM
To: ccielab@groupstudy.com
Subject: frame-relay inverse arp
hi group:
Normally, we are required to not use auto-arp for frame-relay during
CCIE exam, I just confuse about the 2 commands:
frame-relay inverse-arp
arp frame-relay
I know frame-relay is necessary to trun off the auto arp. then how about
the 2nd command? also necessary?
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART