From: Scott Morris (swm@emanon.com)
Date: Mon Jul 10 2006 - 01:20:41 ART
Or more importantly, if you do a regrade, your configs are pasted to a new
rack. Just as if you reloaded. :)
Things you do SHOULD survive a reboot, but you're correct in that it is not
a REQUIRED thing.
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: Standley, Jeffrey [mailto:jeffrey.standley@shawgrp.com]
Sent: Sunday, July 09, 2006 6:27 PM
To: sy1977@gmail.com; frenzeus@streamyx.com
Cc: swm@emanon.com; pbhatkoti@gmail.com; lchuon@gmail.com;
ccielab@groupstudy.com
Subject: Re: OSPF authentication using rollover keys
In an answer to part of frenzeus's question about reloading of equipment in
the lab...I've been personally told by 2 of the cisco proctors that they DO
NOT reload the devices before grading. I was told they grade the rack as
you leave it. This of course doesn't mean that a device will not get
reloaded by accident.
Jeff Standley
Network Engineer (CCNP, CCSP)
The Shaw Group, Inc.
4171 Essen Ln
Baton Rouge, LA 70809
225.987.6209
----- Original Message -----
From: nobody@groupstudy.com <nobody@groupstudy.com>
To: allboutcisco <frenzeus@streamyx.com>
Cc: Scott Morris <swm@emanon.com>; Radioactive Frog <pbhatkoti@gmail.com>;
Larry Chuon <lchuon@gmail.com>; Cisco certification
<ccielab@groupstudy.com>
Sent: Sun Jul 09 17:06:21 2006
Subject: Re: OSPF authentication using rollover keys
I am also facing the same problem , everything works fine with brodacst
network..but with NBMA I always have problem when two diffrent key on HUB.
Appreciate if some one can test this on NBMA and confirm if it works or not?
Thanks
On 7/9/06, allboutcisco <frenzeus@streamyx.com> wrote:
>
> Hi group,
>
> I picked this thread up some time back. Till date, myself i have yet
> to be able to get it working after reloading of the routers, despite
> the numerous attempts with all the debugs, it jus seems that the
> rollover stops after a reload.
>
> Even attempts to wait "forever" the neighbor just wouldn't form. I
> believe i'm not the only person faced with this issue. Question is, is
> there really a way to get by this or the only way after a reload is to
> manually re-apply the "ip ospf message-digest-key" command on the hub?
>
> Appreciate if someone could shed some light, if being faced with this
> in the real lab, can i safely assume that the proctors will not reload
> the routers before grading or should i just NOT configure the
> authentication (thereby losing crucial points) to avoid neigbors not
> establishing if in the event that the proctors DO reload the routers?
>
> Any advice out there is greatly appreciated!
>
> Thanks.
>
> -K
>
> ----- Original Message -----
> From: "Scott Morris" <swm@emanon.com>
> To: "'Radioactive Frog'" <pbhatkoti@gmail.com>
> Cc: "'Larry Chuon'" <lchuon@gmail.com>; "'Cisco certification'"
> <ccielab@groupstudy.com>
> Sent: Monday, May 29, 2006 1:29 AM
> Subject: RE: OSPF authentication using rollover keys
>
>
> > Not sure about that (haven't tried real hard). According to the
> > debugs, it sends with the keys it knows about. And there are notes
> > about
> mismatched
> > keys (key-id not present on spoke side), but it just seems that
> > after a while the hub side gives up and thinks he's surrounded by
> > idiots. :)
> >
> > Perhaps it's a count thing, in which case changing the frequency of
> > your hello's would change it. I was running on non-broadcast
> > interface, so things were only every 30 seconds anyway. I'm not by
> > my systems at the moment, so anyone else wanna give it a whirl?
> >
> >
> > Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
> JNCIE
> > #153, CISSP, et al.
> > CCSI/JNCI
> > IPExpert CCIE Program Manager
> > IPExpert Sr. Technical Instructor
> > smorris@ipexpert.com
> > http://www.ipexpert.com
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of Radioactive Frog
> > Sent: Sunday, May 28, 2006 10:28 AM
> > To: Scott Morris
> > Cc: Larry Chuon; Cisco certification
> > Subject: Re: OSPF authentication using rollover keys
> >
> > Is there any way, to reduce this convergence time from 10 minute to
> couple
> > of minute ?
> >
> > Frog.
> >
> > ____________________________________________________________________
> > ___ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > ____________________________________________________________________
> > ___ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART