From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Thu Jul 06 2006 - 03:35:25 ART
Are you referring to a E1 controller with a configuration similar to the
T1 below:
controller T1 0/1/0
framing esf
linecode b8zs
channel-group 0 timeslots 1-5
!
interface Serial0/1/0:0
no ip address
encapsulation frame-relay
!
interface Serial0/1/0:0.1 point-to-point
ip address 155.1.12.1 255.255.255.0
frame-relay interface-dlci 102
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Hash Aminu
Sent: Wednesday, July 05, 2006 11:18 PM
To: Cisco certification
Subject: serial interfaces on a 3825 ISR
hello GS
i just got a 3825 ISR , when it came there was config on from the
previous owner , i coud see the serial interfaces , and even some frame
relay configs on it . but as soon as i wr e and reload the router they
were gone. just the E1 controllers .
i believe is something new i dont know . any one has an idea on how to
bring them up.
thanks in advance
hash
-- B.Eng, MCP,CCNA, CCNP
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:46 ART