From: Vazman (vazman@gmail.com)
Date: Fri Jun 30 2006 - 15:04:36 ART
You need to use the "squeeze" command to make that space availabe again.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/fun_r/cfr_1g11.htm#wp1033453
On 6/30/06, Victor Cappuccio <cvictor@protokolgroup.com> wrote:
>
> Hi guys, sorry for this silly question, but I want to erase (destroy) the
> files that are in the flash with out needing to erase all files that are
> in
> there
>
> Rack2R4#show flash:
>
>
>
> System flash directory:
>
> File Length Name/status
>
> 1 16025884 c2600-j1s3-mz.123-18.bin
>
> 2 647 init.conf [deleted]
>
> 3 742 init.conf [deleted]
>
> 4 800 init.conf [deleted]
>
> 5 2635 init.conf [deleted]
>
> [16031032 bytes used, 221892 available, 16252924 total]
>
> 16384K bytes of processor board System flash (Read/Write)
>
>
>
>
>
> The flash shows that the file is deleted, but it is still there and using
> space
>
> I rebooted the router but without luck
>
> Thanks
>
> Victor.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:34 ART