From: Anderson Mota Alves (mota_anderson@hotmail.com)
Date: Wed Jun 21 2006 - 15:36:57 ART
Hi Aamir,
The main difference between them is the "ip default-gateway" command is
used in Layer 2 so imagine you have a 3550 that there is no routing
working on it "ip routing" so this command will create a gateway if
needed for this equipment, but in case you have Layer 3 working on it the
"ip default-gateway" has no effect at all so "ip default-network" needs
to be used in for example using RIP as your routing protocol you will see
The Gateway of Last Resort as 0.0.0.0 pointing to the route that you have
configure through the default network command.
Regards,
Andy
--------------------------------------------------------------------
From: "Aamir Aziz" <aamiraz77@gmail.com>
Reply-To: "Aamir Aziz" <aamiraz77@gmail.com>
To: ccielab@groupstudy.com
Subject: Difference between default-network and default-gateway
command
Date: Wed, 21 Jun 2006 21:01:41 +0400
>Hi folks,
>
>I could never understand the difference between default-network and
>default-gateway command even in doc cd its not clear can someone
elaborare.
>
>Thanks
>Aamir
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART