Re: port priority for spanning-tree on which switch (both?)

From: Petr Lapukhov (petr@internetworkexpert.com)
Date: Wed Jun 21 2006 - 13:00:13 ART

Koen,

actually, it's necessary to confiure "port-priority" on "upstream" bridge,
that is the one, that is closer to STP root.

In lab, it's typical to have two 3550, so you usually change port-priority
at root bridge.

HTH

2006/6/21, Koen Zeilstra <koen@koenzeilstra.com>:
>
> Hi group,
>
> What would be lab best practise to configure prefer traffic flowing on one
> of the two trunks.
>
> Configure port priority on both switches? Only on the root bridge or only
> on the non-root bridge.
>
> I would love to hear your opinion on this.
>
> thanks,
>
> Koen
>
> -----------------------
> "See - the thing is - I'm an absolutist. I mean, kind of ... in a way
> ..."
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
> 

-- 
Petr Lapukhov, CCIE #16379
petr@internetworkexpert.com

Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Outside US: 775-826-4344

This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART