From: Jian Gu (guxiaojian@gmail.com)
Date: Wed Jun 21 2006 - 02:19:03 ART
Switch runs a certain hash algorithm (based on your configuration) which is
programmed in HW to select exit port, nothing tricky. Why bother?
On 6/20/06, Victor Cappuccio <cvictor@protokolgroup.com> wrote:
>
> Hi Group
>
>
>
> Is there anyway to use a debug to test this?
>
>
>
> When src-mac is used, load distribution based on the source and
> destination
> IP address is also enabled. For all IP traffic being routed, the switch
> chooses a port for transmission based on the source and destination IP
> address. Packets between two IP hosts always use the same port for packet
> transmission, but packets between any other pair of hosts might use a
> different transmission port.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART