sparse-dense mode

From: tony hall (tony_hall123@hotmail.co.uk)
Date: Tue Jun 20 2006 - 10:41:07 ART

• Next message: Petr Lapukhov: "Re: VACL"
• Previous message: Chris Lewis: "Re: Doubt in CAR : Rate limit"
• Next in thread: Victor Cappuccio: "RE: sparse-dense mode"
• Maybe reply: Victor Cappuccio: "RE: sparse-dense mode"
• Maybe reply: tony hall: "RE: sparse-dense mode"
• Maybe reply: PANDI MOORTHY: "Re: sparse-dense mode"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Group,
I have 3 routers connected in a triagle, Router A, B and C.Router A is hub
usinfg sub int . .I have to enable RP on router B for 1 group, another RP on
router B for different group.Router A is RP-discovery.We need to enable PIM
spares-Dense mode only on all 3 serial int running FR ( enable spare mode on
all int, and let Dense mode to discover all groups if RP fails)
.If i enable PIM nbma mode on all 3 serial interface,I get warning that nmba
mode is not recommended in this mode but interface still accept the command.

Will we loose the point in the lab if we still force PIM NBMA MODE on
sparse-dense mode, enabled interfaces ?.

Regards.

• Next message: Petr Lapukhov: "Re: VACL"
• Previous message: Chris Lewis: "Re: Doubt in CAR : Rate limit"
• Next in thread: Victor Cappuccio: "RE: sparse-dense mode"
• Maybe reply: Victor Cappuccio: "RE: sparse-dense mode"
• Maybe reply: tony hall: "RE: sparse-dense mode"
• Maybe reply: PANDI MOORTHY: "Re: sparse-dense mode"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART